Heavy Reman Howo Tipper Truck TX 8×4

Heavy Duty Reman Truck for Sale Description

• Pre-owned dump trucks often carry unseen frame stress, axle fatigue and powertrain wear from years of overloading.
• REMAN ROAD reman workflow carries out magnetic particle inspection on the main chassis, assesses every axle for wear, and replaces aging components before they fail.
• Each finished heavy duty reman truck for sale passes leakage, power and braking validation to reduce unplanned downtime on your worksite.

Specification Table

• Model Name: Reman Sinotruk Howo 8×4 Tipper Truck TX
• Drive Form: 8×4, 10 wheels. Axles fully disassembled, worn gears/bearings replaced and calibrated
• Cab: TX single sleeper cab with A/C. Sandblasted, crack inspected, repainted, seals & interior renewed
• Engine: SINOTRUK MC11, Full teardown, wearable components replaced, dyno power tested
• Transmission: HW25712XSL,12-speed with PTO. Bearings & synchronizers renewed, shift bench tested
• Front Axle: 9.5t steer axle. Kingpins and seals replaced, brake assembly rebuilt
• Rear Axle: 16t dual reduction axle. Gears inspected/replaced, backlash recalibrated
• Steering: BOSCH hydraulic power steering. Pump & aging hoses replaced, leak tested
• Braking: WABCO dual-circuit air brake. Valves and air chambers renewed, air tightness tested
• Tires: 12.00R20, 10+1 spare. New tires fitted, wheel hubs inspected & resurfaced
• Fuel Tank: 300L, cleaned internally and pressure leakage tested
• Cargo Box: 5600×2300×1500mm, NM450 wear-resistant steel. Crack welding reinforcement & inspection
• Hydraulic Tipping: HYVA front cylinder. Pump & seals replaced, repeated full lifting cycle test
• Electrical: 24V system, twin batteries. Wiring harness renewed, all lights & sensors debugged
• Suspension: Multi-leaf spring + shock absorber. Fatigued springs and dampers replaced

Multi-Axle Chassis Integrity Assurance

• 8×4 dump trucks bear heavier load and stress on four axles, making frame twist and axle fatigue the most common hidden risks. REMAN ROAD reman workflow prioritizes full structural inspection of the whole multi-axle chassis.
• We carry out magnetic particle crack detection on main frame, cross members and all four axle housings. Any micro-cracks will be welded and reinforced before assembly.
• All suspension brackets, U-bolts and leaf spring seats are inspected dimensionally. Deformed or fatigued mounting parts get replaced to avoid frame shift under heavy payload.
• The whole chassis will be aligned and calibrated to guarantee even load distribution across four axles, preventing uneven tire wear and abnormal axle damage during long-time heavy haul.

Upfront Capital Savings for Fleet Investment

• Brand-new 8×4 heavy dump trucks require extremely high lump-sum payment, locking massive capital in fixed assets and limiting your budget for other project investment.
• REMAN ROAD heavy duty reman truck for sale cut your initial procurement cost greatly, freeing cash flow for material procurement, labor cost and project expansion.
• When you need to deploy more trucks for multiple quarries or earthwork sites, reman units allow you to build a bigger fleet with the same budget compared to buying new trucks.
• The asset depreciation curve of heavy duty reman truck is much gentler. Your fleet asset value will not drop sharply right after putting trucks into operation.

RFQ

• Q1: For this heavy duty reman truck for sale, what baseline condition will rule out a chassis before reman starts?
  A: We conduct magnetic particle crack detection on the main frame and all 4 axles. Any chassis with frame distortion, deep irreparable cracks, severe impact damage or twisted axle housings will be rejected and will not enter our remanufacturing line.
• Q2: When replacing components on the multi-axle chassis, do you use genuine OEM parts or alternative spare parts?
  A: Safety-critical and power core parts use OEM or equivalent certified high-quality replacements. Cosmetic non-load-bearing components adopt qualified aftermarket parts. A complete list of all replaced parts will be attached in the reman delivery document.
• Q3: What heavy-load validation tests will this heavy duty reman truck complete before shipment?
  A: Engine dyno power test, load calibration, full-load hydraulic continuous lifting test, whole-vehicle air brake tightness test, and loaded off-road simulation road test to mimic mine working conditions.
• Q4: Will you supply full reman archive and inspection reports when we receive the truck?
  A: Yes. Each REMAN ROAD heavy duty reman truck for sale comes with a dedicated reman file, which records component grading, replacement list and all test data for your fleet asset audit.
• Q5: What is covered in the warranty for this reman Sinotruk Howo 8×4 tipper truck?
  A: Warranty applies to remanufactured engine, gearbox and four drive axles. Consumable items including tires, brake linings and rubber seals are excluded from warranty coverage.
• Q6: Can we modify cargo box plate thickness or upgrade hydraulic power to fit our local heavy ore hauling work?
  A: Yes, custom reman modification is available for bulk fleet orders. We can reinforce cargo box plates, adjust hydraulic lifting speed according to your material weight and site gradient.